Rs232 Connection11/7/2021
RS232 devices can be plugged straight into the.Certain ACE have RS232 ports or configurable RS232/485 ports.RS232 connector is a port used for data exchange between equipments. USB to Serial connection solutions are vast and affordable.RS232 is a popular communications protocol for connecting modems and data acquisition devices to computers. These products are compatible with new & legacy RS232 CNCs, serial equipment, point of sale applications, & other mobile devices. Our Serial Connect line is perfect for shop floors inclined to use a traditional RS232 cabling connection to machine tools.TX (must be connected to RX pin of the connected device) The illustration on the right shows the connections. It is NOT a TTL level (0 / 5 VDC) : A logic high is represented by a negative voltage -5 while a logic low transmits a positive voltage +5 V.ACE RS232 ports have three pin connectors.
However, the shield should only be connected at one end of the cable.Wirring of the HMI serial port HMI D-sub 9 pinsWirring from the HMI to the RS232 3 position plug of the ACEIf you don’t see this indicator light blinking on your HMI, it’s probably a wiring cable problem. the – (or B), on the middle pin or RS232’s TX pin.The ground can be connected to the cable shield. the + (or A), on the same pin as the RS232’s RX When configured as RS232, the connections are identical to the connections shown for the dedicated RS232 ports.If the port is configured for RS485, the two connections used are
0 Comments
Leave a Reply.AuthorDavid ArchivesCategories |